406 Top Beam Clamp Small Mouth
PIPE HANGERS & SUPPORTS (Beam Clamps)
|
|
|
Recommended for use under roof installations with bar joist type construction where flange thickness does not exceed 5/8 inch.
- Materials:
- Ductile Iron c/w hardened steel cup point set screw
Sizes 3/8" & 1/2" available in Stainless Steel 304SS & 316SS - Sizes 5/8" & 3/4" available in Stainless Steel 316SS
- Approvals:
- U.L. - U.L.C. listed 3/8 and 1/2 (1/2 for 4" IPS max).
FM approved for 3/8" Malleable Iron only.
Complies with MSS SP-58 and SP-69 (Type 19)
- Notes:
- Stainless Steel Only Available up to 3/4"
- *3/8" & 1/2" Beam Clamps can be used in an inverted application; however, this will reduce the load rating.
- **It is also recommended that stainless steel Beam Clamps not be used in an inverted application.
Product Sheet
163.92KB
Finishes
Zinc Plated (Z)
Bare Metal
Stainless Steel (316SS)
Stainless Steel (304SS)
Product Sheet
163.92KB
Finishes
Zinc Plated (Z)
Bare Metal
Stainless Steel (316SS)
Stainless Steel (304SS)
Product Sheet
163.92KB
| Rod Size In. |
Material/Finish | Standard Box Quantity | Quantity Required (each) |
Add to Quote |
|---|---|---|---|---|
| 3/8 | 1 | Add | ||
| 1/2 | 1 | Add | ||
| 5/8 | 1 | Add | ||
| 3/4 | 1 | Add | ||
| 7/8 | 1 | Add |